2021 (3) 2
https://doi.org/10.15407/polymerj.43.03.172
Influence of diluents and plasticizers on the properties of epoxy-polysulfide composites
K.M. Sukhyy,
Ukrainian State University of Chemical Technology, Gagarin Avenue, 8, Dnipro, Ukraine, 49005,
e-mail: ksukhyy@gmail.com
ORCID: 0000-0002-4585-8268
A.N. Nosova,
Ukrainian State University of Chemical Technology, Gagarin Avenue, 8, Dnipro, Ukraine, 49005,
e-mail: ikichemistry@gmail.com
ORCID: 0000-0002-0595-5290
O.A. Belyanovskaya,
Ukrainian State University of Chemical Technology, Gagarin Avenue, 8, Dnipro, Ukraine, 49005,
e-mail: belyanovskaya@voliacable.com
ORCID: 0000-0003-1873-4574
I.V. Sukha,
Ukrainian State University of Chemical Technology, Gagarin Avenue, 8, Dnipro, Ukraine, 49005,
e-mail: belyanovskaya@voliacable.com
ORCID: 0000-0002-5579-2047
Wu Yiqi,
Harbin Institute of Technology, Harbin, People’s Republic of China,
e-mail: belyanovskaya@voliacable.com
ORCID: 0000-0002-9743-4133
Yu. Kocherhin,
Harbin Institute of Technology, Harbin, People’s Republic of China,
e-mail: belyanovskaya@voliacable.com
ORCID: 0000-0002-0073-7622
Т. Hryhorenko,
Harbin Institute of Technology, Harbin, People’s Republic of China,
e-mail: grigorencot@rambler.ru
ORCID: 0000-0003-4583-575X
Polym. J., 2021, 43, no. 3: 172-179.
Section: Structure and properties.
Language: Ukrainian.
Abstract:
It was found that to increase the adhesive and physicomechanical properties of compositions based on epoxy resin and polysulfide rubber (thiokol), cured without heat treatment, it is necessary to carry out a preliminary thioetherification reaction (PRTE) due to the interaction of rubber mercaptan groups and oxirane cycles of epoxy resin at elevated temperatures and then use the product of this reaction to cure at room temperature. Composite materials based on the products of the thioetherification reaction significantly surpass analogs based on mechanical mixtures of epoxy resin and thiokol in terms of cohesive and adhesive strength, deformation capacity, fracture work, and specific impact strength.
It is shown that the introduction of both diluents and plasticizers into the products of the preliminary thioetherification reaction of epoxy resins and polysulfide rubbers leads to an increase in the parameters of tensile strength and deformation capacity. The greatest strengthening effect is achieved with the use of oligoesteracrylate MGF-9 and glycidyl ether of diethylene glycol DEG-1, the smallest – with the introduction of the plasticizer EDOS. It was found that the introduction of plasticizers promotes some increase in the adhesive strength, but much less in comparison with the cohesive strength. In this case, the adhesion and cohesive characteristics change antibatically. It has been shown by dynamic mechanical spectrometry that the presence of diluents and plasticizers in epoxy-polysulfide composites leads to a decrease in the temperatures of the maximum values of the tangent of the angle of mechanical losses, loss modulus, the initial and final sections of the transition of the material from the glassy to the highly elastic state, as well as the density of the chemical network in the epoxy matrix.
Key words: epoxy resin, polysulfide rubber, preliminary thioetherification reaction, diluents, plasticizers..
REFERENCES
1. Zaytsev Yu. S., Kochergin Yu. S., Pakter M. K., Kucher R. V. Epoxy oligomers and adhesive compositions. Kiev: Nauk. dumka. (Ukr.), 1990: 200. ISBN 5-12-001431-3.
2. Babayevskiy P. G. Treshchinostoykost otverzhdennykh polimernykh kompozitsiy. M.: Khimiya. 1991. 336. ISBN 5-7245-0167-8 .
3. Kochergin Yu. S., Kulik T. A., Grigorenko T. I. Special–Purpose Epoxy Adhesives. Polymer Sci. Ser. C, 2007, 49, no. 1: 17–21. https://doi.org/10.1134/S1811238207010043.
4. Kochergin Yu. S., Grigorenko T. I., Shologon V. V., Loyko D. P. Epoksidnyye klei so spetsialnym kompleksom svoystv. Voprosy Khimii i Khimicheskoi Tekhnologii. (Rus.), 2007, no. 5: 92–98.
5. Kochergin Yu. S., Grigorenko T. I., Zolotareva V. V. Vliyaniye tiokola i karboksilatnykh oligobutadiyenovykh kauchukov na svoystva epoksidnykh polimerov. Voprosy Khimii i Khimicheskoi Tekhnologii, (Rus.), 2006, no. 5: 162–166.
6. Pyrikov A. V., Loiko D. P., Kochergin Yu. S. Modification of Epoxy resins with liquid polysulfide and carboxylated butadiene rubbers. Polymer Science. Ser. D, 2010, 3, no. 3: 185–189. https://doi.org/10.1134/S1995421210030068.
7. Sukhyy K.M., Belyanovskaya E.A., Nosova A.N., Sukhyi M.K., Huang Y., Kocherhin Yu., Hryhorenko T. Properties of epoxy-thiokol materials based on the products of the preliminary reaction of thioetherification. Voprosy Khimii i Khimicheskoi Tekhnologii, 2021, no. 3: 128–136. https://doi.org/10.32434/0321-4095-2021-136-3-128-136.
8. Malkin A.Ya., Askadskiy A.A., Kovriga V.V. Metody izmereniya mekhanicheskikh svoystv polimerov. M.: Khimiya (Rus.), 1978: 336.
9. Li Kh., Nevill K. Spravochnoye rukovodstvo po epoksidnym smolam. M.: Energiya. (Rus.), 1973: 416.
10. Eselev A.D., Bobylev V.A. Syryevaya baza kleyev i lakokrasochnykh materialov. Klei. Germetiki. Tekhnologii (Rus.), 2012, no. 4: 25–31.
11. Kochergin Yu.S., Grigorenko T.I., Nedolya N.A., Samoylova E.E. Issledovaniye viniloksa v kachestve razbavitelya epoksidnykh kompozitsiy. Voprosy Khimii i Khimicheskoi Tekhnologii (Rus.), 2010, no. 4: 80–84.
12. Mostovoy A.S. Retsepturnaya modifikatsiya epoksidnykh smol s ispolzovaniyem novykh vysokoeffektivnykh plastifikatorov. Sovremennyye naukoyemkiye tekhnologii (Rus.), 2015, no. 7: 66–70.
13. Barshteyn R.S., Kirillovich V.I., Nosovskiy Yu.E. Plastifikatory dlya polimerov. M.: Khimiya (Rus.), 1982: 216.
14. Khozin V.G. Usileniye epoksidnykh polimerov. Kazan: Izd-vo PIK «Dom pechati» (Rus.), 2004: 446.
15. Kozlov V.P., Papkov S.P. Fiziko-khimicheskiye osnovy plastifikatsii polimerov. M.: Khimiya (Rus.), 1981: 224.
16. Kochergin Yu.S., Grigorenko T.I., Shologon V.V., Loyko D.P. Epoksidnyye klei so spetsialnym kompleksom svoystv. Voprosy Khimii i Khimicheskoi Tekhnologii (Rus.), 2007, no. 5: 92–98.