2023 (2) 4

https://doi.org/10.15407/polymerj.45.02.125

PROPERTIES OF NANOSTRUCTURED COMPOSITES OF POLY(VINYLIDENE FLUORIDE) WITH DOPED POLY(3-METHYLTHIOPHENE)

N.A. Ogurtsov,
V. P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry NAS of Ukraine, 1, Academician Kukhar Street, Kyiv, 02094, Ukraine,
e-mail: ogurtsov@bpci.kiev.ua
ORCID: 0000-0002-5193-2276
M.V. Borysenko,
Chuiko Institute of Surface Chemistry NAS of Ukraine, 17, General Naumov Street, Kyiv, 03164, Ukraine,
e-mail: borysenko@nas.gov.ua
ORCID: 0000-0001-8707-1749
A.A. Pud,
V. P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry NAS of Ukraine, 1, Academician Kukhar Street, Kyiv, 02094, Ukraine,
e-mail: alexander.pud@gmail.com
ORCID: 0000-0002-0681-633X

Polym. J., 2023, 45, no. 2: 125-134.

Section: Structure and properties.

Language: Ukrainian.

Abstract:

The combination of properties of intrinsically conducting polymers (ICPs) and functional nanostructured template materials opens up prospects for their use in various fields, ranging from bioelectronics to sensors and energy conversion. Successful combinations solve one of the important drawbacks of many ICPs, created by their insolubility and infusibility, and help to achieve their full potential in thermally processable materials. When developing such hybrid materials, it is necessary to take into account the sensitivity of ICP properties to interphase interactions due to extended π-conjugation in these polymers. However, this aspect of ICP-based nanocomposites has not been sufficiently studied yet. In this paper we investigate the effect of template submicron poly(vinylidene fluoride) (PVDF) particles and the nature of the dopant on properties of poly(3-methylthiophene) (P3MT) precipitated as the shell at the PVDF core surface in the course of the 3MT oxidative polymerization. For this purpose, we compare the properties of P3MT phase of the composites with the properties of the neat P3MT doped with dodecylbenzenesulfonate (DBS), perfluorooctanoate (PFO) and chloride anions. In the formed composite core-shell particles the P3MT is in the form of asymmetric nanoparticles which are localized almost exclusively at the surface of PVDF particles. According to the conjugation length, neat polymers form the following series: P3MT-Cl > P3MT-DBS > P3MT-PFO as evidenced by the IR spectral analysis. In their composites the conjugation length of P3MT doped with Cl- does not change noticeably, while for the DBS and PFO anions cases it increases and for the DBS case it exceeds that of Cl- case. X-ray phase analysis showed an increase in the degree of crystallinity of P3MT-Cl and P3MT-DBS phases in the composition of composites by 1.4 and 1.3 times relative to the corresponding values for the neat doped P3MTs. Such an increase can be caused by the influence of the local electric field of the dipoles of the electroactive part of the crystalline phase of PVDF (β- and γ-phase) on the spatial arrangement of charged P3MT macromolecules formed on the surface of PVDF. Thermogravimetric studies show an increase in the thermal stability of the doped P3MT phase of nanocomposites while conductivity measurements reveal a significant effect of the nature of the dopant anion.

Key words: poly(3-methylthiophene), poly(vinylidene fluoride), interphase interactions, crystallinity, thermal stability.

References

1. Roncali J. Conjugated Poly(thiophenes): Synthesis, Functionalization, and Applications. Chem. Rev., 1992, 92, 4: 711−738. https://doi.org/10.1021/cr00012a009
2. McCullough R. D. The Chemistry of Conducting Polythiophenes. Adv. Mater., 1998, 10, 2: 93−116.https://doi.org/10.1002/(SICI)1521-4095(199801)10:2<93::AID-ADMA93>3.0.CO;2-F.
3. Schopf G., Kossmehl G. Polythiophenes-Electrically Conductive Polymers. Berlin: Springer-Verlag, 1997: 166. ISBN 3-540-61483-4. https://doi.org/10.1007/BFb0111619.
4. Handbook of Oligo- and Polythiophenes / Ed D. Fichou. Weinhem: Wiley-VCH, 1999: 534. ISBN 3 -527-29445-7.
5. Ebnesajjad S. Fluoroplastics. Amsterdam: William Andrew, 2015, 2: 745. ISBN: 978-1-4557-3197-8.
6. Ameduri B. From Vinylidene Fluoride (VDF) to the Applications of VDF-Containing Polymers and Copolymers: Recent Developments and Future Trends. Chem. Rev., 2009, 109, 12: 6632−6686. https://doi.org/10.1021/cr800187m.
7. Martins P., Lopes A. C., Lanceros-Mendez S. Electroactive Phases of Poly(vinylidene fluoride): Determination, Processing and Applications. Prog. Polym. Sci., 2014, 39, 4: 683−706. https://doi.org/10.1016/j.progpolymsci.2013.07.006.
8. Fonseca C. P., Benedetti J. E., Neves S. Poly(3-methyl thiophene)/PVDF composite as an electrode for supercapacitors. J. Power Sources, 2006, 158, 1: 789−794. https://doi.org/10.1016/j.jpowsour.2005.08.050.
9. Ogurtsov N.A., Bliznyuk V.N., Mamykin A.V., Kukla O.L., Piryatinski Yu.P., Pud A.A. Poly(vinylidene fluoride)/poly(3-methylthiophene) core-shell nanocomposites with improved structural and electronic properties of the conducting polymer component // Phys. Chem. Chem. Phys., 2018, 20, 9: 6450−6461. https://doi.org/10.1039/C7CP07604E.
10. Ogurtsov N. A., Mamykin A. V., Kukla, O. L., Pavluchenko A. S., Borysenko M. V., Piryatinski Y. P., Pud A. A. The Impact of Interfacial Interactions on Structural, Electronic, and Sensing Properties of Poly (3‐methylthiophene) in Core‐Shell Nanocomposites. Application for Chemical Warfare Agent Simulants Detection. Macromolecular Materials and Engineering, 2022, 307, 4: 2100762. https://doi.org/10.1002/mame.202100762.
11. Cortili G., Zerbi G. Chain conformations of polyvinylidene fluoride as derived from its vibrational spectrum. Spectrochimica Acta A, 1967, 23, 2: 285–299. https://doi.org/10.1016/0584-8539(67)80231-9.
12. Tashiro K., Kobayashi M., Tadokoro H. Vibrational Spectra and Disorder-Order Transition of Poly(viny1idene fluoride) Form III. Macromolecules, 1981, 14, 6: 1757–1764. https://doi.org/10.1021/ma50007a028.
13. Lanceros-Mendez S., Mano J.F., Costa A.M., Schmidt V.H. FTIR and DSC studies of mechanically deformed -PVDF films. J. Macromol. Sci. B., 2001, 40, 3–4: 517–527. https://doi.org/10.1081/MB-100106174.
14. Hotta S., Shimotsuma W., Taketani M., Kohiti S. XPS and IR study of electrochemically or chemically redoped poly(3-methylthienylene) films. Synthetic Metals, 1985, 11, 3: 139–157. https://doi.org/10.1016/0379-6779(85)90060-8.
15. Furukawa Y., Akimoto M., Harada I. Vibrational key bands and electrical conductivity of polythiophene. Synthetic Metals, 1987, 18, 1-3: 151–156. https://doi.org/10.1016/0379-6779(87)90870-8.
16. Louarn G., Trznadel M., Buisson J. P., Laska J., Pron A., Lapkowski M., Lefrant S. Raman Spectroscopic Studies of Regioregular Poly(3-alkylthiophenes). J. Phys. Chem., 1996, 100, 30: 12532–12539. https://doi.org/10.1021/jp960104p.
17. Herna´ndez V., Casado J., Ramı´rez F.J., Zotti G., Hotta S., Navarrete J.T.L. Efficient π electrons delocalization in α,α’-dimethyl end-capped oligothiophenes: A vibrational spectroscopic study. J. Chem. Phys., 1996, 104, 6: 9271–9282. https://doi.org/10.1063/1.471674.
18. Garnier F., Tourillon G., Barraud J.Y., Dexpert H. First evidence of crystalline structure in conducting polythiophene. Journal of Materials Science, 1985, 20, 8: 2687−2694. https://doi.org/10.1007/BF00553029.
19. Nicolau Y.F., Moser P. Study of Free Volume and Crystallinity in Polybithiophene and Poly(3-methylthiophene). Journal of Polymer Science B, 1993, 31, 11: 1529−1543. https://doi.org/10.1002/polb.1993.090311110.